Special Design for Refractory Suppliers - Mullite light-weight insulation bricks – MINYE
Special Design for Refractory Suppliers - Mullite light-weight insulation bricks – MINYE Detail:
Product Description
The light weight mullite bricks contains high porosity, which can save more heat and therefore reduces the cost of fuel. Meanwhile the light weight means less heat storage capacity, so less time is required when the kiln is heated or cooled. Faster periodic operation is workable.
It can be applied at the temperature range from 900 to 1600 ℃.
It is mainly used as kiln lining in high temperature(less than 1700 ℃) kilns of ceramics, petrochemical, metallurgy and machinery.
Typical Features
Low thermal conductivity, low heat capacity, low impurity content
High strength, excellent thermal shock resistance, erosion resistance
Accurate dimension
Typical Application
Ceramics roller kiln and shuttle kiln: standard brick, roller passage hole brick, hanger brick,
Metallurgy industry: hot blast furnace; inner lining of foundry kilns
Power industry: power generation and fluidised bed equipment
Electrolytic Aluminium industry: kiln inner lining
Typical product properties
|
Mullite light-weight insulation bricks Product Properties |
||||||
| Product Code | MYJM-23 | MYJM-26 | MYJM-28 | MYJM-30 | MYJM-32 | |
| Classification Temperature (℃) | 1260 | 1400 | 1500 | 1550 | 1600 | |
| Density (g/cm³) | 550 | 800 | 900 | 1000 | 1100 | |
| Permanent linear thrinkage (℃×8h) | 0.3 (1260) | 0.4 (1400) | 0.6 (1500) | 0.6 (1550) | 0.6 (1600) | |
| compressive strength(Mpa) | 1.1 | 1.9 | 2.5 | 2.8 | 3 | |
| Repture strength(Mpa) | 0.8 | 1.2 | 1.4 | 1.6 | 1.8 | |
| Thermal conductivity (W/m.k) (350℃) | 0.15 | 0.26 | 0.33 | 0.38 | 0.43 | |
| Chemical composition (%) | Al2O3 | 40 | 54 | 62 | 74 | 80 |
| Fe2O3 | 1.2 | 0.9 | 0.8 | 0.7 | 0.5 | |
| Note: Test data shown are average results of tests conducted under standard procedures and are subject to variation. Results should not be used for specification purposes. The products listed comply to ASTM C892. | ||||||
Product detail pictures:
Related Product Guide:
Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for Special Design for Refractory Suppliers - Mullite light-weight insulation bricks – MINYE , The product will supply to all over the world, such as: Bangladesh, Egypt, Philadelphia, All of our products comply with international quality standards and are greatly appreciated in a variety of markets around the world. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients in the near future.
By Miriam from Cambodia - 2017.05.02 11:33
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Elsie from Indonesia - 2018.02.12 14:52
