Quality Inspection for Ceramic Boards - Mullite light-weight insulation bricks – MINYE
Quality Inspection for Ceramic Boards - Mullite light-weight insulation bricks – MINYE Detail:
Product Description
The light weight mullite bricks contains high porosity, which can save more heat and therefore reduces the cost of fuel. Meanwhile the light weight means less heat storage capacity, so less time is required when the kiln is heated or cooled. Faster periodic operation is workable.
It can be applied at the temperature range from 900 to 1600 ℃.
It is mainly used as kiln lining in high temperature(less than 1700 ℃) kilns of ceramics, petrochemical, metallurgy and machinery.
Typical Features
Low thermal conductivity, low heat capacity, low impurity content
High strength, excellent thermal shock resistance, erosion resistance
Accurate dimension
Typical Application
Ceramics roller kiln and shuttle kiln: standard brick, roller passage hole brick, hanger brick,
Metallurgy industry: hot blast furnace; inner lining of foundry kilns
Power industry: power generation and fluidised bed equipment
Electrolytic Aluminium industry: kiln inner lining
Typical product properties
|
Mullite light-weight insulation bricks Product Properties |
||||||
| Product Code | MYJM-23 | MYJM-26 | MYJM-28 | MYJM-30 | MYJM-32 | |
| Classification Temperature (℃) | 1260 | 1400 | 1500 | 1550 | 1600 | |
| Density (g/cm³) | 550 | 800 | 900 | 1000 | 1100 | |
| Permanent linear thrinkage (℃×8h) | 0.3 (1260) | 0.4 (1400) | 0.6 (1500) | 0.6 (1550) | 0.6 (1600) | |
| compressive strength(Mpa) | 1.1 | 1.9 | 2.5 | 2.8 | 3 | |
| Repture strength(Mpa) | 0.8 | 1.2 | 1.4 | 1.6 | 1.8 | |
| Thermal conductivity (W/m.k) (350℃) | 0.15 | 0.26 | 0.33 | 0.38 | 0.43 | |
| Chemical composition (%) | Al2O3 | 40 | 54 | 62 | 74 | 80 |
| Fe2O3 | 1.2 | 0.9 | 0.8 | 0.7 | 0.5 | |
| Note: Test data shown are average results of tests conducted under standard procedures and are subject to variation. Results should not be used for specification purposes. The products listed comply to ASTM C892. | ||||||
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and superb good quality control throughout all stages of manufacturing enables us to guarantee total buyer gratification for Quality Inspection for Ceramic Boards - Mullite light-weight insulation bricks – MINYE , The product will supply to all over the world, such as: Puerto Rico, Vietnam, Ukraine, Our company adheres to the spirit of "lower costs, higher quality, and making more benefits for our clients". Employing talents from the same line and adhering to the principle of "honesty, good faith, real thing and sincerity", our company hopes to gain common development with clients from both at home and abroad!
By Marcia from Georgia - 2017.06.19 13:51
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Lena from Morocco - 2018.12.11 14:13
