Manufacturer for Ceramic Refractory Materials - High Temp Refractory Mortar – MINYE
Manufacturer for Ceramic Refractory Materials - High Temp Refractory Mortar – MINYE Detail:
Product Description
The refractory mortar is a new type of inorganic binding material, made of powder which is of the same quality as the brick installed, inorganic binder and admixture.
It is divided into two types, namely, the air-setting and heat-setting types. It consists of 1400, 1600 and 1750 three classes, each of which is divided into light weight and heavy weight types.
Refractory mortar should be applied as per the brick type.
Typical Features
excellent integration
good porosity; erosion-resistance; long service life
high refractoriness under load
easy installation
high binding strength
high purity
Typical Application
lining for various kinds of kiln
binding refractory fiber blanket and board
Typical product properties
|
Refractory Mortar Product Properties |
||||
| Product Code | MYJN-1400 | MYJN-1600 | MYJN-1750 | |
| Classification Temperature (℃) | 1400 | 1600 | 1750 | |
| Density (g/cm³) | 1700 | 1900 | 2000 | |
| Rupter strength(Mpa) (After drying from 110℃) | 3.1 | 3.5 | 3.7 | |
| Permanent linear thrinkage (%) (After drying from 110℃) | 3 | 2.5 | 2.2 | |
| Refractory degree (℃) | ≥1760 | ≥1790 | ≥1790 | |
| Chemical composition (%) | Al2O3 | 35 | 43 | 55 |
| Fe2O3 | 1.3 | 1.2 | 0.9 | |
| Note: Test data shown are average results of tests conducted under standard procedures and are subject to variation. Results should not be used for specification purposes. The products listed comply to ASTM C892. | ||||
Product detail pictures:
Related Product Guide:
With dependable high quality approach, great reputation and excellent customer support, the series of products and solutions produced by our firm are exported to lots of countries and regions for Manufacturer for Ceramic Refractory Materials - High Temp Refractory Mortar – MINYE , The product will supply to all over the world, such as: Amsterdam, Ukraine, Accra, With the advanced workshop, professional design team and strict quality control system, based on mid- to high-end marked as our marketing positioning, our products are fast selling onto European and American markets with our own brands such as below Deniya, Qingsiya and Yisilanya.
By Natalie from Sao Paulo - 2018.12.25 12:43
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Hazel from Jersey - 2017.03.28 16:34
Write your message here and send it to us
