Dense refractory wear-resistant castable
Product Description
The dense wear-resistant refractory castable is made of refractory aggregate , refractory powder . binders and other additives. At the construction site, it can be mixed with proper liquid, vibrated and fired before use.
Typical Features
high strength, wear-resistance, low porosity
thermal shock resistance
excellent stability , erosion-resistance
easy installation, long service life
Typical Application
metallurgy industrial furnace
chemical industrial furnace
waste incinerator
circulating fluidized bed boiler
Typical product properties
|
Light-weight insulation/refractory castable Product Properties |
|||||||||||
| Product Code | MYC160 | MYC160-G | MYC150-T | MY145-NG | MYC143-ULC | MYC150 | MYC145-T | MYC145-M | MYC140-CB | MYC140-HA | |
| Density (g/cm³) | 3 | 3.1 | 2.7 | 2.7 | 2.7 | 2.9 | 2.5 | 3 | 2.4 | 2.5 | |
| Repture strength(Mpa) | 110℃ x 24 h | 11 | 7 | 11 | 5 | 7 | 11 | 9 | 7 | 5.6 | 5 |
| 1000℃ x 3 h | 13 | 10 | 13 | 11 | 12 | 12 | 13 | 8 | 6 | 4 | |
| compressive strength(Mpa) | 110℃ x 24 h | 110 | 45 | 105 | 30 | 30 | 100 | 90 | 65 | 17 | 35 |
| 1000℃ x 3 h | 115 | 75 | 115 | 90 | 90 | 115 | 1258 | 80 | 49 | 30 | |
| Permanent linear thrinkage (℃×3h) (%) | 0.5 (1600) | 0.5 (1600) | 0.3 (1500) | 0.4 (1450) | 0.4 (1430) | 0.3 (1500) | 0.3 (1500) | 0.3 (1450) | 0.2 (1450) | 0.2 (1400) | 0.3 (1400) |
| Chemical composition (%) | Al2O3 | 92 | 85 | 75 | 75 | 75 | 80 | - | 85 | 55 | - |
| Fe2O3 | 0.5 | - | 1 | - | - | - | - | - | - | - | |
| Cr2O3 | - | 9 | - | - | - | - | - | - | - | - | |
| SiC | - | - | 20 | - | - | - | 70 | - | - | - | |
| CaO | - | - | - | ＜ 0.2 | ＜ 1.96 | - | - | - | - | - | |
| MgO | - | - | - | - | - | - | - | 10 | - | - | |
| Note: Test data shown are average results of tests conducted under standard procedures and are subject to variation. Results should not be used for specification purposes. The products listed comply to ASTM C892. | |||||||||||
Write your message here and send it to us
