Bulk fiber is produced by melting high purity raw materials in resistance furnace, then adopt blown/spuning process, the bulk fiber is without secondary processing and heat treatment.
Low heat capacity, low thermal conductivity
Excellent Thermal Stability
Excellent Chemical Stability
Binder free and Corrosion free
Excellent sound absorption
Feed material for blanket, board, textiles
Feed material of foam, castable, coating
High Temp gaskets sealing
Insulation in expansion joints
Feed material for wet processing products
Bulk Fiber | Normal Kaolin | Standard Purity | High Purity | High Al Purity | Lower AZS | Standard AZS | ||
Temperature Grade℃ | 1050 | 1260 | 1260 | 1300 | 1300 | 1430 | ||
Recommended Operating Temperature℃ | ≤950 | ≤1100 | ≤1150 | ≤1200 | ≤1200 | ≤1250 | ||
Product Code | MYTX-PT-01 | MYTX-BZ-01 | MYTX-GC-01 | MYTX-GL-01 | MYTX-DG-01 | MYTX-HG-01 | ||
Fiber Diameter(μm) | 3~5 | 3-5(Spun) | 3~5 | 2~4 | 3~5 | 3~5 | ||
2-4(Blown) | ||||||||
Shot Content(Φ≥0.212mm)(%) | ≤20 | ≤20 | ≤20(Kaolin) | ≤15(HP) | ≤20(Kaolin) | ≤15(HP) | ≤15 | ≤15 |
Al2 O3 | ≥40 | ≥43 | ≥44 | ≥52 | ||||
Al2 O3 +SiO2 | ≥95 | ≥97 | ≥98.5 | ≥98.5 | ||||
Al2 O3 +SiO2 +ZrO2 | ≥99 | ≥99 | ||||||
ZrO2 | 5~7 | ≥15 | ||||||
Fe2 O3 | ≤1.0 | ≤1.0 | ≤1.0(Kaolin) | ≤0.5(HP) | ≤1.0(Kaolin) | ≤0.5(HP) | ≤0.5 | ≤0.5 |
Note: Test data shown are average results of tests conducted under standard procedures and are subject to variation. Results should not be used for specification purposes. The products listed comply to ASTM C892.